Mount the TV

Mount the TV

New TVs belong on the wall. Beyond a sleeker design, mounted TVs save space and let you hide ugly wires. Luckily, mounting a TV to drywall is an easy project all homeowners can learn.

Materials and Tools

You’re going to need a few supplies before you get started:

  • TV
  • Wall mount and related screws or bolts
  • Drill
  • Level
  • Tape measure
  • Stud finder
  • Pencil
  • Washers
  • TV wiring kit or raceway
  • Outlet cover

Purchase Correct TV Mount

There are many TV mounts on the market. Whether you buy from Amazon, in store or anywhere else, this is depending on your choice. Outside reading the mount description, the most important detail is how big a TV it can hold. If the TV mount only holds a 55-inch TV, don’t test it on a 65-inch TV. A heavy TV can break a smaller mount and ruin your wall and equipment’s.

You also need to decide if you want a swivel mount or flat mount. They do cost a bit more, but the added convenience is worth it.

Determine Location

Next, you have to decide where to mount your TV. Before you do so, consider the wires. If cords are not a concern, your TV should be at eye-level when you sit down. While most televisions are installed a bit higher, that angle can hurt your neck.

If you want to hide the wires or mount the TV above a fireplace or mantel, installation becomes a bit tricky. Most professionals are used to it, but the labor is more demanding. In fact, the professional cost to install a flat screen TV above a mantel or fireplace is $280.

Find the Studs

Drywall can hold small TVs, 19” or less. Most televisions these days are much larger, so make sure to install the wall mount into studs.

If you don’t have a stud finder, consider the following tips:

  • Studs are generally 16 from each other. If you know where one stud is, mark it with a pencil and measure horizontally 16 inches either direction to find the others.
  • Knock on the wall. If it sounds solid, you’ve found a stud. If it sounds hollow, or if you can’t tell, consider purchasing a good stud finder.

Attach TV Mount to Wall

  • Hold your mount up to the wall, in the wanted location.
  • Mark the holes in the mount with a pencil. Mark one hole per stud (total of two).
  • Put the mount down and drill some pilot’s holes into the wall.
  • Take your mount and screw into the wall with screws that came with it.
  • Do not screw in all the way. Leave just enough so it can hang on the wall with no human support.

Place your level on the mount. If it’s not level, you have to adjust the mount. If it is level, you have to install any necessary bolts and washers (both ensure TV holds). Make sure the mount is now firmly attached to the wall.

Cut Holes in Walls for Wires

If you want to hide your wires, continue with this step. If not, skip to the next step.

First, make sure a power source is nearby. If not, an electrician will have to add an outlet. Electricians should connect it right below or above the mount.

On the other hand, if you use a raceway, you can skip this step all together.

Attach Mounting Brackets to TV

Your mount should have pieces that attach to the TV. Follow the mount’s manual and connect such pieces. Make sure they’re tightly fastened as these metal bars actually hold your TV.

Mount the TV

With the assistance, gently place your TV on the wall mount. If necessary, tighten the two screws below the TV. Some mounts do not require additional screws.

Before letting go, make sure it’s steady and level. Sit on your couch to test the angle and power source.

vedicgroup

Leave a Reply

Your email address will not be published. Required fields are marked *